gabo Systemtechnik Product brochure 12 gabocom Network level 3 and 4 SPEED•PIPE® – PIPE-IN-PIPE SOLUTION speed•pipe® for pipe-in-pipe solutions are blown into PE-HD ducts over long distances. Due to their inner wall concept the empty space within occupied or empty duct systems can be optimally used. At the same time the higher inner diameter compared to the buriable micro ducts offers space for high fibre capacities – which you can exploit also decades afterwards for every single speed•pipe®. • small outer diameter for an optimum exploitation of the existing duct capacity • can also be blown into occupied PE-HD protective ducts (Ø 40, 50, 63 mm) • even reusable after the removal of installed fibre-optic cables – practically like on the first day • for all dimensions specified sliding ribs providing an optimum air cushion for the fibre-optic during the blowing-in process • available in various dimensions in intense colours for better distinction Step 1: Utilization of existing duct systems. speed•pipe® for pipe-in-pipe solutions. Wooden one-way spool D × B (mm)** 1200 × 370 1200 × 370 1200 × 370 1200 × 370 1200 × 370 Term speed•pipe® 7 × 0.75 speed•pipe® 10 × 1.0 speed•pipe® 12 × 1.1 speed•pipe® 14 × 1.3 speed•pipe® 16 × 1.5 D × s (mm)* 7 × 0.75 10 × 1.0 12 × 1.1 14 × 1.3 16 × 1.5 Colour red, green, blue, yellow, white, grey, orange, black, brown, violet red, green, blue, yellow, white, grey, orange red, green, blue, yellow, white red, green, blue, yellow, white red, green, blue Length (m) 5000 2500 2000 1500 1200 Additional colours available on request Fitting overview in the product catalog or under www.gabocom.com SPEED•PIPE® FOR PIPE-IN-PIPE APPLICATIONS Characteristics Each pipe-in-pipe system is only as good as its durability! Gas-, dirt- and water-tight sealing and fixing elements are essential for a long usability and for the protection of your network technoloy. Notice * D × s = outer diameter × wall thickness // ** D × B = outer diameter × total width
RkJQdWJsaXNoZXIy MTYzMjU=