gabo Systemtechnik Product brochure 16 gabocom Network level 3 and 4 speed•pipe® bundles. Solid and progressive in one go. FOR CABLE DUCT SYSTEMS Ø > 80 MM Thick-walled single tubes: SRV-G By means of a cable basket on the flexible jacket pipe the speed•pipe® bundles SRV-G are pulled into cable duct systems. • Reduce the time of installation and simplify the assembly at the same time: due to the thick-walled, inside speed•pipe® ground (see page 24) a higher tensile strength at the bundle is permitted. • For higher distances the use of lubricants and turning the spool is recommended. • Suitable for all FTTx-sections: FTTN, FTTC, FTTB, FTTH Spool D × B (mm)** 1200 × 370 2400 × 1200 2400 × 1200 2400 × 1200 2400 × 1200 2400 × 1200 2400 × 1200 2400 × 1200 Term SRV-G 32 / 3 × 12 SRV-G 40 / 4 × 12 SRV-G 50 / 5 × 12 SRV-G 40 / 3 × 14 SRV-G 50 / 4 × 14 SRV-G 50 / 5 × 14 SRV-G 40 / 3 × 16 SRV-G 50 / 4 × 16 Jacket pipe orange D × s (mm)* 32 × 0.5 40 × 0.5 50 × 0.5 40 × 0.5 50 × 0.5 50 × 0.5 40 × 0.5 50 × 0.5 I (m) 400 2700 2700 3400 1700 1700 2100 2100 speed•pipe® ground / amount 3 4 5 3 4 5 3 4 speed•pipe® ground / D × s (mm)* 12 × 2.0 12 × 2.0 12 × 2.0 14 × 2.0 14 × 2.0 14 × 2.0 16 × 2.0 16 × 2.0 SRV-G FOR FTTC AND FTTN Every pipe-in-pipe system is only as good as its durability! Gas-, dirt- and water-tight sealing and fixing elements are essential for a long usability and for the protection of your active network technology Characteristics Notice * D × s = outer diameter × wall thickness // ** D × B = outer diameter × total width
RkJQdWJsaXNoZXIy MTYzMjU=