gabo Systemtechnik Product brochure 18 gabocom Network level 3 and 4 speed•pipe® bundles. Solid and progressive in one go. FOR PE-HD DUCTS Ø 32, 40, 50, 63 MM Thick-walled single tubes with cutting device: SRV-G The higher permissible tensile strength of speed•pipe® ground especially pays off in case of a tight relation of the existing capacity to the outer diameter of the speed•pipe®. Nevertheless for being able to use the remaining space, a cutting device removes the lose duct coat before the pulling-in process. A pulling head that is mounted directly at the ends of the speed•pipe® fixes the single tubes and guarantees the optimum focus on power – without taking up more space inside the duct. Thus also bundles with more than eight speed•pipe® inside or additional single tubes can be linearly fed into the duct system. • A pulling head directly fixes the single speed•pipe®, without increasing the outer diameter of the speed•pipe® bundle. • A cutting device removes the flexible jacket pipe before reaching the duct system, for minimizing the friction losses. • For higher distances the use of lubricants and turning the spool is recommended. • In practical application for FTTB and FTTH * D × s = outer diameter × wall thickness // ** D × B = outer diameter × total width SRV-G WITH CUTTING DEVICE FOR FTTB AND FTTH Spool D × B (mm)** 2400 × 1200 2400 × 1200 2400 × 1200 2400 × 1200 2400 × 1200 2400 × 1200 Term SRV-G 32 / 6 × 7*** SRV-G 40 / 8 × 7 SRV-G 50 / 10 × 7 SRV-G 40 / 14 × 7 SRV-G 50 / 18 × 7 SRV-G 50 / 24 × 7 Jacket Pipe orange D × s (mm)* 32 × 0.5 40 × 0.5 50 × 0.5 40 × 0.5 50 × 0.5 50 × 0.5 I (m) 4000 4000 4000 3500 1950 1800 speed•pipe® ground / amount 6 8 10 14 18 24 speed•pipe® ground / D × s (mm)* 7 × 1.5 7 × 1.5 7 × 1.5 7 × 1.5 7 × 1.5 7 × 1.5 Colour yellow-green orange turquoise Spool D × B (mm)** 1200 × 370 1200 × 370 1200 × 370 Term speed•pipe® ground 12 × 2.0 speed•pipe® ground 14 × 2.0 speed•pipe® ground 16 × 2.0 Length (m) 2000 1500 1200 D × s (mm)* 12 × 2.0 14 × 2.0 16 × 2.0 * D × s = outer diameter × wall thickness // ** D × B = outer diameter × total width // *** after technical clarification Characteristics
RkJQdWJsaXNoZXIy MTYzMjU=