gabo Systemtechnik Product brochure 32 gabocom Network level 3 and 4 Connecting elements. Simple. Gas- and water-tight. Details of fittings in the product catalog or at www.gabocom.com Tensile, suitable for direct burying, pressure-tight up to 15 bar: By means of the transparent connectors two speed•pipe® with the same outer diameter can be connected – without any negative impact on the blowing-in distance. Quickly and easily mounted, the fittings are separated by removing the locking ring. TRANSPARENT PERMANENT CONNECTORS DSM 7 / 10 / 12 / 14 / 16 / 20 In contrast to the transparent permanent connectors, the reducers allow two speed•pipe® with the same inner diameter to be easily connected to each other - without any negative effects on the blowing-in distance. The result is not only tension-resistant, directly buriable and pressure-tight up to 15 bar, but the speed•pipe® can also be separated from each other quickly and easily by removing the locking ring of the reducer. REDUCERS RSM 10 – 7 / 12 – 10 / 14 – 12 / 16 – 14 Short assembly time, huge time-saver at blowing-in fibre-optic cables: As soon as the maximum blowing-in length has been reached, the speed•pipe® is opened and the blowing-in procedure is simply continued at this point. The divisible connectors permanently connect the occupied speed•pipe® up to 0.5 bar – for jetting-in the complete length – gas- and water-tight up to 10 bar for 30 minutes. BLOWING-IN CONNECTORS EBM 7 / 10 / 12 / 14 / 16 / 20 The SRV-M and SRV-M MAXI protect the joints of two buried speed•pipe® bundles against gas- and water-ingress through the gaps between the ducts in a pressure-tight way. At a pipe-in-pipe solution with a jacket pipe up to Ø 63 mm or at the transition to a buried bundle, the connectors link the whole duct system, as well gas-, pressure and water-tight. SPEED•PIPE® BUNDLE CONNECTORS
RkJQdWJsaXNoZXIy MTYzMjU=